Mana Games

[carlosforonda]

Copy the 2D court in Tennis Elbow 2013 \ Data \ court01, for example.
If you paste the 2D court in court01, then open the game and select the clay court.

[grandslamaces]

HIc.
I've paste my 2D court in court01 and choose clay court , but the game still use the original court while i replaced it by my court.@@@

[carlosforonda]

HIc.
I've paste my 2D court in court01 and choose clay court , but the game still use the original court while i replaced it by my court.@@@

Close y open the game again. Don't forget change 3D court: OFF.

[grandslamaces]

It's ok. I choose clay court, and the game used my court. But when i press "Left shift" and "1" at the same time, still not worked. Hic..

[carlosforonda]

It's ok. I choose clay court, and the game used my court. But when i press "Left shift" and "1" at the same time, still not worked. Hic..

Are you using the following keys to adjust the camera? right side of the keyboard.
Keys on keypad :

1 : zoom out
2 : zoom in
+ : rotate camera up
- : rotate camera down
4 : move camera up
5 : move camera down
7 : move camera back
8 : move camera front
9 : save camera (so it'll be already set next time you enter the court) ; the camera settings are saved in the [Camera] section of the Tennis.ini
6 : reset camera
3 : toggle custom camera on/off (only work after the camera has been saved)

[grandslamaces]

I use laptop, so not having keys on right side. I use "1" button above "Q" button

[carlosforonda]

I use laptop, so not having keys on right side. I use "1" button above "Q" button

I have never adjusted the camera using a laptop.

[grandslamaces]

Many thank for your helps. I will change keyboard and do it again. Hope it'll work

[carlosforonda]

Many thank for your helps. I will change keyboard and do it again. Hope it'll work

Anyway there must be some way to do it with a laptop.

[grandslamaces]

Hope so. But when replay the ball, button "1","2"...still work

[grandslamaces]

Hi Carlosforonda,

I changed my keyboard of the computer and it worked. Thank you so much

[carlosforonda]

Hi Carlosforonda,

I changed my keyboard of the computer and it worked. Thank you so much

You're welcome.