in the v0.65 (hopefully coming in a few days), you'll be able to edit the position of the Speed & Time texts.
To do so, add these lines to your Stadium.ini :
- Code: Select all
[Boards2D]
SpeedPos = 0.377 0.286
SpeedHeight = 0.016
SpeedRot = 0
SpeedUnitPos = 0.379 0.303
SpeedUnitHeight = 0.016
SpeedUnitRot = 0
TimePos = 0.626 0.304
TimeHeight = 0.016
TimeRot = 0
And under [Data], set this line to :
- Code: Select all
Boards = Challenger
The "Pos" lines let you position the center of the text, in normalized X/Y texture coordinates (ie: from 0 to 1) ; to find these coordinates, position the mouse cursor like this in Photoshop :
Note : if X/Y isn't in percentage, click on the + sign on their left.
Then divide the percentages shown by 100 and you'll get the normalized values ; in the case of the picture, it's 0.626 and 0.304.
For the "Height" lines, take the normalized height of the text zone ; to find it, select the text zone like this in Photoshop :
Then divide H by 100 ; from the picture, this would give 0.016.
The "Rot" lines let you rotate each text around the vertical axis ; the value is in degree, so you'll usually have something from -45 to 45, with 0 being parallel to the court back wall.
If you need to adjust any value, you can save your Stadium.ini, leave the warm-up or the match, and then start it again.